Wednesday, December 26, 2018
N97954 Stinson Control Column Rebuild
Hello, My Name is Will and I own a 1946 Stinson 108-1 project and a lot of other Stinson parts!
Sunday, December 9, 2018
Well shoot! Bad news
So after stripping the fuselage, my plan was to take the fuselage to Legend Cub in Sulfur Springs Tx and have them paint the fuselage.
We loaded the fuselage on a trailer, and hauled it out to them, but when we were unloading it, Darin the owner of Legend, noticed that the compression tube above the windshield was bent.
I assume it was compressed during a ground loop or something like that, but the consensus was that we would need a fuselage Jig to fix it.
I started looking for a replacement fuselage.
 |
| As you can see, there is a significant bend in that tube. |
Hello, My Name is Will and I own a 1946 Stinson 108-1 project and a lot of other Stinson parts!
Saturday, December 8, 2018
Original 3200 tailwheel
Hello, My Name is Will and I own a 1946 Stinson 108-1 project and a lot of other Stinson parts!
Tuesday, October 9, 2018
Flight control bearing cushions.
Notice that the flight controls have an oiler cushion on either side of the hanger.
Hello, My Name is Will and I own a 1946 Stinson 108-1 project and a lot of other Stinson parts!
Sunday, October 7, 2018
Original Brake/Rudder pedals.
Hello, My Name is Will and I own a 1946 Stinson 108-1 project and a lot of other Stinson parts!
Saturday, September 22, 2018
Wing cable routing
Hello, My Name is Will and I own a 1946 Stinson 108-1 project and a lot of other Stinson parts!
Subscribe to:
Comments (Atom)